Your cart is currently empty.
Choose Your Greeting Card Design:
You May Also Like These
Subtotal
$0.00
Shipping & Handling :
Calculated in Checkout
Total
$0.00
Your cart is currently empty.
Subtotal
$0.00
Shipping & Handling :
Calculated in Checkout
Total
$0.00
FREE SHIPPING ON ORDERS $65+
Poggers
October 31, 2024
Poggers
October 31, 2024
Jamming is common in Gel Blasters. Check out how to fix a jammed blaster and discover more common issues here.
>Jamming is common in Gel Blasters. Check out how to fix a jammed blaster and discover more common issues here.
We're a small business in Wisconsin!
Jamming is a very common issue many face while playing with Gel Blasters. This can be frustrating for those who are just trying to enjoy a game with family and friends, especially if it happens frequently. In this article, we’re discussing reasons why Gel Blasters can jam and ways to fix it.

While playing Gel Blasting, the odds of a Gel Blaster getting jammed are always there. You know your Gel Blaster is jammed when the gel balls don’t fire or when the trigger is stuck. Below, we’re breaking down what could be causing your Gel Blaster to jam.
The most common reason for a Gel Blaster to jam is a dead battery. If the toy gun suddenly stops firing, make sure to check the battery. Each electric gun is powered by batteries that can be replaced or recharged. After charging the battery, try it again and see if it works,
Jamming can happen with new guns and sometimes there may be a part inside not assembled correctly. You can always disassemble the gun and reassemble it according to the manufacturer’s instructions.
If the magazine is low on ammo or not clipped correctly then the gel balls can’t be fed into the gun. First, remove the magazine and see if it’s clean. If it’s dirty, use a soft cloth to remove any dirt. Refill the magazine with the correct sized Orbeez before trying again. If the Gel Blaster still isn’t working, it’s possible the magazine motor is out of order or the spring is faulty.
If you’re trying new gel balls or playing for the first time and your blaster is jamming, check the quality of the water beads being used for ammunition. Every Orbeez gun manufacturer specifies the size and type of gel balls that pair well with the blaster. Oftentimes, they might not be the right kind or they could have been soaked for too long. The longer they soak, the larger they get. The standard size for Gel Blasters is between 7-8mm, so if they’re too large then they can get stuck.
If you’re reusing gel balls that were stored, double-check their size as well. They can also grow in size after being stored for a while.
The gearbox of an Orbeez gun is made of gears that are responsible for firing the gel balls. If the parts aren’t lubricated regularly then they’re prone to wear and tear. If your Gel Blaster suddenly jams, open the gearbox and check for stuck or broken parts. Lubricate the gears if you see any of them getting stuck. If you notice any damage, take the blaster to a professional to replace the broken parts.
The barrel and hop-ups are parts of the Gel Blaster that need regular cleaning because they tend to accumulate the most dirt and debris. If they aren’t cleaned then parts of the blaster will get stuck and stop shooting. Clean these parts with a soft cloth or use silicone lubricants to keep the parts working smoothly.

Jamming is the most common problem with Gel Blasters. However, owners may notice a few other odd problems with their toy related to jamming.
Sometimes, when the trigger is pulled, the user may notice a high-pitched screeching noise. This can also result in no gel ball firing. Usually when this happens, that means there might be a gear loose. If the trigger is pulled too aggressively, the gear teeth shear off, resulting in a loose gear. There is an adjustable screw near the grip that can be tightened. However, if the gun is still making this noise after then it might be time to take it to a professional.
If the gel balls are not grown to the recommended size or aren’t suitable for the blaster then you may notice weak firing. Occasionally, the gel balls may not even fire at all and just dribble out of the barrel. This can happen when the tappet, or return spring, isn’t working properly.
The return spring is meant to compress air inside the blaster to propel the gel balls out of the barrel. When the spring is weak or rusty, it won’t function properly. You can have the spring changed by a professional.
If your Gel Blaster only shoots while upside down, it’s usually because the magazine isn’t filled all the way. Remove it, refill it with Orbeez, and try again.
Sometimes, a Gel Blaster may reach the end of its lifespan or become too much trouble to repair. When that happens, the best option is to replace it with a new one. Here are two top recommendations for your next Gel Blaster (Please note, these links are affiliate links and advertisements for Amazon. We earn comissions from qualifying purchases - we do not currently carry enough gel blasters to advertise our own products at this time):
The M416 Large Gel Ball Blaster delivers high-performance action and eco-friendly fun, making it a must-have for outdoor team battles. With a sleek camouflage design and dual manual-electric modes, it shoots up to 8 gellets per second with a range of 65 feet for non-stop excitement. Its upgraded gearbox ensures smooth gameplay, while biodegradable gel balls provide safe, hassle-free play. This all-in-one battle kit includes an 800-capacity drum magazine, 50,000 gellets, a rechargeable battery, red dot sight, safety goggles, and a target—offering unbeatable value. Ideal for gifts or thrilling team games, the M416 guarantees hours of unforgettable adventure!
If you want to check out the product page for this replacement gel blaster for your jammed blaster, click the button below.
The SplatRball SRB1200 Gel Blaster is a powerhouse of action and excitement, perfect for water bead enthusiasts! With fully automatic firing at up to 11 rounds per second and a speed of 210fps, it delivers intense close-range battles with friends and family. Featuring a 1,200-round drum magazine, 6,000 gel water balls, a rechargeable battery with up to 5,000 shots per charge, and safety glasses, this kit ensures non-stop fun with minimal downtime. The water-activated target and foldable funnel add precision and ease, while the safe, non-toxic gel ammo makes cleanup effortless. Whether for casual games or skill-building, the SRB1200 is built for endless thrilling adventures!
If you want to check out the product page for this replacement gel blaster for your jammed blaster, click the button below.

Like every mechanical device, Gel Blasters experience wear and tear over time. It’s common for a malfunction to happen every once in a while, especially if the Gel Blaster is used frequently or not taken care of. If you notice any of the issues right after buying it, then it’s best to return it. But as long as you take care of the blaster by cleaning and lubricating it regularly, it should last you a long time.
Open the blaster and carefully remove any stuck gel beads. Check for any obstructions in the barrel and feeding mechanism.
Use properly soaked, high-quality gel beads, clean the magazine regularly, and ensure the blaster is free of dirt and debris.
Common causes of jamming include using poorly sized gel beads, dirt buildup in the barrel or magazine, or a malfunctioning feeding mechanism.
Disassemble the magazine, shake out any leftover gel beads and use compressed air to clear any blockages in the feeding gear.
Yes, most jams can be resolved with basic disassembly and cleaning. However, consult a professional if you notice damaged parts.
Inspect the Gel Blaster for any damaged components, such as the barrel or feeding gears. It may also be time to replace the gel beads or upgrade parts.
No, firing a jammed blaster can cause further damage. Always clear the jam first before attempting to fire again.
Poggers.com sells stuff about what you’re reading.
$65.00 away from free shipping!
Leave a comment